Monocouche render
Monocouche comes from the French to mean single layer, monocouche render is was adopted in Europe to describe modern renders that differ from traditional lime or cement renders. In general monocouche renders use white ordinary Portland cement as a binder instead of the more commonly used grey ordinary Portland cement, this allows the render mix to be coloured with pigment more easily and thus only needing the one layer without painting.
Essentially the ingredients of Monocouche render are cement, sand, lime, and pigments often along with modifying admixtures like silica, mica, which help performance. Polymer admixtures like acrylic resin are also used and sometimes the render is referred to as polymer render, these can help improve resistance to staining and water ingress as well as flexibility against cracking which maybe be increased due to the single nature of the coat.
Some issues with such renders have been noted to be colouration due to UV exposure and in some cases hairline cracks, and because it is through coloured it can be difficult to repair. However some contractors may use a mesh over the first pass of the render, although it s a single layer product it is often applied in two passes, the mesh in the middle can help movement without cracking. Finally although water resistant, it is actually water proof per se, though this can depend much on the different manufacturer and the additives used.
[edit] Related articles on Designing Buildings
Featured articles and news
Costs and insolvencies mount for SMEs, despite growth
Construction sector under insolvency and wage bill pressure in part linked to National Insurance, says report.
The place for vitrified clay pipes in modern infrastructure
Why vitrified clay pipes are reclaiming their role in built projects.
Research by construction PR consultancy LMC published.
Roles and responsibilities of domestic clients
ACA Safety in Construction guide for domestic clients.
Fire door compliance in UK commercial buildings
Architect and manufacturer gives their low down.
Plumbing and heating for sustainability in new properties
Technical Engineer runs through changes in regulations, innovations in materials, and product systems.
Awareness of the Carbon Border Adjustment Mechanism
What CBAM is and what to do about it.
The new towns and strategic environmental assessments
12 locations of the New Towns Taskforce reduced to 7 within the new towns draft programme and open consultation.
Buildings that changed the future of architecture. Book review.
The Sustainability Pathfinder© Handbook
Built environment agency launches free Pathfinder© tool to help businesses progress sustainability strategies.
Government outcome to the late payment consultation, ECA reacts.
IHBC 2025 Gus Astley Student Award winners
Work on the role of hewing in UK historic conservation a win for Jack Parker of Oxford Brookes University.
Future Homes Building Standards and plug-in solar
Parts F and L amendments, the availability of solar panels and industry responses.
How later living housing can help solve the housing crisis
Unlocking homes, unlocking lives.
Preparing safety case reports for HRBs under the BSA
A new practical guide to preparing structural inputs for safety cases and safety case reports published by IStructE.
Male construction workers and prostate cancer
CIOB and Prostate Cancer UK encourage awareness of prostate cancer risks, and what to do about it.